Comments for NovoKane

Comment on Constructing the Speed Vest circuit board by Expanding the Arduino: cheap ways to add output pins and power | NovoKane

Expanding the Arduino: cheap ways to add output pins and power | NovoKane — Wed, 09 Jun 2010 15:45:58 +0000

[...] to switch high voltage, AC power. For that project I blindly followed the authors’ design and soldered 13 triacs in point-to-point wiring on an Arduino shield. That was not an experience I wanted to [...]

Comment on Made by Hand: Searching for Meaning in a Throwaway World by Erica

Erica — Thu, 03 Jun 2010 00:42:34 +0000

This review was referenced by Boing Boing: Made by Hand in LA Times' Brand X.

Comment on Coasterbot, aka Robie the Robot by Make: Robot Build: Robot round-up | Daring Minds.Com

Make: Robot Build: Robot round-up | Daring Minds.Com — Fri, 28 May 2010 23:59:20 +0000

[...] the Robot: [Project Site] [Video] [...]

Comment on Coasterbot, aka Robie the Robot by Make: Robot Build: Robot round-up | vid-tube.com

Make: Robot Build: Robot round-up | vid-tube.com — Fri, 28 May 2010 23:34:15 +0000

[...] the Robot: [Project Site] [Video] [...]

Comment on Coasterbot, aka Robie the Robot by Make: Robot Build: Robot round-up - machine quotidienne

Make: Robot Build: Robot round-up - machine quotidienne — Fri, 28 May 2010 21:47:24 +0000

[...] the Robot: [Project Site] [Video] [...]

Comment on Coasterbot, aka Robie the Robot by Techs for Planet - Make: Robot Build: Robot round-up

Techs for Planet - Make: Robot Build: Robot round-up — Fri, 28 May 2010 20:17:46 +0000

[...] the Robot: [Project Site] [Video] [...]

Comment on Playing with a solar robot by Potato batteries | NovoKane

Potato batteries | NovoKane — Mon, 24 May 2010 19:56:35 +0000

[...] thing. After we were ready, I wandered around and saw a boy whose project involved the exact same solar robot that Holly and I had recently made. Like us, he had difficulty with the power connections, and was [...]

Comment on Testing coasterbot construction ideas by Erica

Erica — Sun, 11 Apr 2010 22:01:45 +0000

Thanks, Shawn!

Comment on Testing coasterbot construction ideas by Shawn

Shawn — Sun, 11 Apr 2010 16:14:26 +0000

I like where you are going with your design! Great idea.

Comment on How to make a ribbon cable by Finishing touches for the Speed Vest | NovoKane

Finishing touches for the Speed Vest | NovoKane — Sun, 04 Apr 2010 01:42:32 +0000

[...] The ribbon cable, by contrast, needed to be significantly shortened, so I cut it and crimped on a new connector. [...]